3/8" NPT Air Filter Regulator Lubricator 40Micron 22-123 psi

Description

Short Description
1. Item: AC series two-point combination
2. Port size: 3/8″ NPT
3. Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
4. Max Supply Pressure: 145 psi;  Operating Pressure: 0-145 psi
5. Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150PSI Gauge & Bracket
Description
Installation and Operating:
Made of aluminum alloy                                                  Hand valve adjust the pressure stably                                          High precision pressure gauge
hard-strength guarantee long service life                   Push-down lock guarantee avoid outside force                          Clear calibration to reading easily
and adapting  to various environment                        change the pressure
Preparation                                                                         Pressure Adjustment                                                                          Dial Reading
Please make sure the max working pressure                 Pull up the hand valve and rotate it to adjust the pressure
Install the gauge on the body tightly
meet your needs.                                                                     as the marking of " +" or "-"  shows                                                       Check that if the pointer rotated smoothly
Please clean the port and fitting before installation,   Turning the pressure as you need and then push down the
to avoid bringing dust to the air path.                               hand valve to lock the pressure.
Semi-automatic drainer                                                     High-transparency sight glass for checking easily                             High-transparency PC cup for checking easily
Adopting differential pressure drainage                       Accurate valve to ensure the stability of                                             Body made of good material to protect cup inside
oil providing
Drainage                                                                                Oil Adjustment                                                                                               Oil Lubrication
Draining water automatically while
Rotate the valve according to the marking of
Ensure that oil inside is less than 80% of the cup
there is no pressure in the cup                                        "+" or "-" to adjust the oil providing
Tighten the oil valve after oil lubricating
Need to push the drainer up to drain
the water when there is pressure in
the cup
The Filter, Regulator＆Lubricator is three part system. The filter is designed to remove most liquid and solid particles from the air supply.
The Self-Relieving Pressure Regulator is used to adjust the outlet pressure. The lubricator provide oil to the air tool and increase the life of the tool.
Technical Details
Item - FRL
Filter/Regulator/Lubricator
Filter Rating
40  micron
Number of Pieces
2
Port  Size
3/8" NPT
Max. Working Pressure
145 psi
Environment & Fluid Temp
41-140 Degrees F
Adjusted pressure Range
22  to 123  psi
Drain Type
Manual
Overall Length(A)
4.61"
Overall Height(C)
8.15"
Overall Width(B)
2.64"
Fluid
Compressed Air
Max. Flow
60 cfm
Oil
Turbine oil No. ISOVG32
Bowl Material
Polycarbonate with Guard
Includes
Pressure Gauge
Additional Information