-40%
4 INCH FORWARD CONTROL KIT VICTORY MOTORCYCLE VEGAS HAMMER JACKPOT HIGHBALL KPIN
$ 105.57
- Description
- Size Guide
Description
4 inch Forward Control Kit Black or ChromeFits Stock and Low Bikes
MOVE YOUR STOCK VICTORY MOTORCYCLE CONTROLS FORWARD 4 INCHES WITH OUR COMPLETE KITS.
REPLACE THE STOCK FORWARD CONTROLS AND REPLACE WITH OUR AFTERMARKET CUSTOM VICTORY MOTORCYCLE CONTROL KITS.
INCLUDES EVERYTHING NEEDED TO MOVE THE CONTROLS OUT AND GIVE YOU THE CUSTOM BIKE FEEL. MORE LEG ROOM FOR TALLER RIDERS
Comes with stainless steel hardware!
Footpeg Extension Kit
Included a brake line extension
Shift Rod is coated black but pic shows it not coated
all hardware is coated black
Includes all hardware to install
Fits Victory Jackpot, Victory Hammer, Highball, Victory Vegas and Kingpin.
Installation:
1. Remove stock forward controls. Remove stock shift linkage. *Note*the linkage ends are right and left handed
2. Remove the linkage ends and lock nuts from the stock linkage and install on the new linkage.
3. Install the right side or Brake side mount using (2) of the 10mm x 50 flat head socket bolt and (2) 10mm x 25socket bolt. Use Blue Loc-Tite on all bolts and tighten.
4. Install the Left side or shifter linkage side mount using (2) of the 10mm x 50 flat head socket bolt and (2) 10mm x 25socket bolt. Use Blue Loc-Tite on all bolts and tighten.
5. Next re-install your shifter linkage and adjust the linkage to your desired setting and lock the 2 locks nuts down.
6. Now double check that all mounting hardware is installed tight.
Fits: Victory Vegas, Victory 8ball, Victory 8 Ball, Victory 8-Ball, Victory Jackpot, Victory Hammer, Victory Kingpin
Another Victory Only exclusive part made in the United States with quality and pride.