-40%

Boat Ramp Kit Jet Ski Wave Runner Shore Dock Lift Roller Wheel Set 1200-2000 Lb

$ 121.43

Availability: 32 in stock
  • MPN: Does Not Apply
  • Return shipping will be paid by: Buyer
  • Brand: Custom Install Parts
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Model: pounds lbs Donut Wobble Wheels Brackets Winch Tow
  • Craft: Water Craft Wave Runner Jetski
  • desc.: Strap Hook Bracings Fasteners Supports Motor Fuel
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Info: Gear Custom DIY Extension Adjustable Jet Ski Wave

    Description

    The Build-It-Yourself Boat Ramp
    Keep your boat high and dry! Take a look at this short video of the fully built product!
    https://youtu.be/4eLktw0Geos
    Wave Runner shown is a XLT 1200, weight is 900lbs. It's being lifted off of the lake about 3 ft. using a 12 volt electric wench purchased at Harbor Freight for about .00.
    These kit’s have everything you need to build your own 1200-2000lb capacity boat ramp!
    YOU WONT FIND A PRICE LOWER THAN THIS!
    This basic kit is a simple and cost effective way to dock your watercraft. Our kits are made to accommodate boats, jet skis, or other PWC’s with a loaded weight from 1200-2000lbs. and they are up to 16 ft in length! You have the privilege, if necessary, to adjusting the length to your satisfaction!
    We are the only seller who includes a 2500 lb winch!! Other sellers are only using 1100-1600lb winches. Why not have the comfort of knowing that your winch will be able to handle the job!
    Here are our models...
    Large Model
    / Wobble Wheel Complete Set-
    Designed to accommodate small boats up to 2000 lbs. and has ability to add length as needed.
    Models come with 2500lb. winch with 33 ft. of strap and hook, winch post supports, bracings, fasteners, and instructions.
    Articulating rollers adjust to the hull of your boat and are non-marking polyurethane with the proper hardness to protect the finish on your watercraft and provide ease of winching up on the ramp.
    Each kit comes with everything you need to build your own 2000 lb. capacity boat ramp, just add treated lumber (not included in kit).
    All hardware brackets are hot dipped galvanized for superior corrosion resistance.
    Click here to view the extension options for this kit
    Assembled Depth (In.)
    192 in
    Assembled Width (In.)
    28 in
    Assembled Height (In.)
    30 in
    Product Weight
    62 lb
    PARTS LIST FOR LARGE MODEL (INCLUDED)
    Qty         Description
    12
    Side Brace
    8
    Axle Bracket
    8
    Axle
    1
    Winch Post Brace – Right
    1
    Winch Post Brace – Left
    1
    Winch
    1
    33 ft (10 Meters) Galvanized  Strap with Hook
    16
    4 Inch Wobble Rollers – Polyurethane
    FASTENERS
    8
    Stainless Steel Nylock Nut – 5/16”
    8
    Stainless Steel Hex Bolt – 5/16” x 1 ½”
    16
    Galvanized Flat Washer – ¾”
    16
    Stainless Steel Cotter Pin – 1/8” x 1”
    38
    Galv. 3” Deck Screws
    32
    Galv. 1 ½” Screws
    26
    Galv. Carriage Bolt – 3/8” x 2 ½”
    3
    Galv. Hex Bolts – 3/8” x 4 ½”
    1
    Galv. Carriage Bolt – ½” x 8” + Nut and Washers
    29
    Galv. 3/8” Nuts
    2
    Galv. 3/8” Flat Washers
    29
    Galv. 3/8” Split Washers
    SUGGESTED
    CUSTOMER SUPPLIED
    LUMBER
    2
    Pressure Treated 2” x 8” x 16 ft *
    8
    Pressure Treated 2” x 6” x 24-42 ft *
    1
    Pressure Treated 4” x 4” x 8 ft *
    ***Customize if necessary
    Small Model
    / Caster Wheel Complete Set-
    Designed to accommodate small boats up to 1200lbs.
    Models come with 2500lb. winch with 33 ft of strap and hook, winch post supports, bracings, fasteners, and instructions.
    Kit includes 12-rollers with mounting brackets, a 1200 lb. capacity winch with 33 ft. of nylon webbing strap with boat hook, post supports, bracing, and all fasteners required.
    Rollers are non marking thermo plastic rubber with the proper hardness to protect the finish on your watercraft and provide ease of winching up onto the ramp.
    All hardware brackets and fasteners are hot dipped galvanized for superior corrosion resistance.
    Click here to view the extension options for this kit.
    Assembled Depth (In.)
    240 in
    Assembled Width (In.)
    28 in
    Assembled Height (In.)
    30 in
    Product Weight
    40 lb
    PARTS LIST FOR SMALL MODEL (INCLUDED)
    Qty         Description
    8
    Side Brace
    24
    Roller Bracket (2/Roller)
    1
    Winch Post Brace – Right
    1
    Winch Post Brace – Left
    1
    Winch
    1
    33 ft. (10 Meter) Galvanized  Strap with Hook
    12
    Rollers – Polyurethane
    12
    Roller Spanner Bushing
    FASTENERS
    12
    Stainless Steel Nylock Nut – 3/8”
    12
    Stainless Steel Hex Bolt – 3/8” x 2 ½”
    30
    Galvanized 3” Deck Screws
    18
    Galv. Carriage Bolts – 3/8” x 2 ½”
    24
    Galv. Hex Bolts – 3/8” x 2 ½”
    3
    Galv. Hex Bolts – 3/8” x 4 ½”
    1
    Galv. Carriage Bolt – ½” x 8” + Nut and Washer
    45
    Galv. 3/8” Nuts
    45
    Galv. 3/8” Split Washers
    1
    Phillips Screwdriver Bit
    SUGGESTED
    CUSTOMER SUPPLIED
    LUMBER
    2
    Pressure Treated 2” x 6” x 16ft
    6
    Pressure Treated 2” x 4” x 20-36ft
    1
    Pressure Treated 4” x 4” x 8ft ***
    ***Customize if necessary