Copper Plating Solution 4 oz Industrial Quality Restoration READ

Description

This is 4 ounces of industrial Copper plating solution.
Use this copper solution under nickel for better
adhesion and longer lasting durability.
There is no end to the car parts you can plate like a pro
for very little money.
The Nickel plating solution is sold in another listing.
Batteries and wire leads are not included
and are intended for demonstration.
Make a simple power supply with 2 D Cell batteries
and two wires taped in configuration shown.
3 to 5 VDC give the best results.
You can also make a power supply from an old cell phone charger.
The better you Clean or Prepare your part,
the better your plating results.
Wire Brush, Scotch Brite, Grinder Wheel Brush,
all good metal cleaning devices.
Pour small amount into container,
Put negative wire on part to be plated,
and positive on cotton brush lead.
You can cut and roll up a piece of cloth for your brush.
Dip brush in solution and make circular motions
on desired plating surface.
Many coats, Even coverage, Take your time.
Re applying solution as needed for complete coverage.
Follow up with Nickel plating solution if desired.
This will give a chrome like finish when properly shined.
Your success will depend mainly on your cleaning
preparation.
Happy plating. Use proper eye protection and safety equipment.