R-Hopped Elvish Tac 6.03mm Tightbore barrel + Modify Flat-Hop Bucking + S-Nub

Description

Features:
R-Hopped
Elvish Tac 6.03mm Stainless Steel Tightbore Barrel
·
R-Hop is the single most important part in airsoft that extends your effective range to over
60m/200ft
. Max range of
90m/300ft
can be achieved
(with M130 spring, 1.7J).
·
This
Elvish Tac
®
6.03
TBB is already professionally R-Hopped.
R-Hopping Steps: 1 Thoroughly cleaning using ethanol alcohol. 2 Professional gluing. 3 Visual and “push from inside” inspection of the R-Hop.
·
An EXTRA R-Hop is also included as redundancy.
·
E-Tac 6.03mm is designed for R-Hopping, with an enlarged Hop window.
·
The groove is extended to indicate any possible
barrel rotation, which can send BBs to left or right.
Now you can check the alignment of the barrel
without disassembling the hopup. Air seal will not be affected.
·
7
Lengths to choose from: 300mm, 340mm, 363mm, 380mm, 407mm, 455mm & 509mm. More lengths available in fall 2020.
·
Please make sure of the right length for your airsoft replica.
·
Traditional R-
Hops are 1.5mm thick and airsoft barrels are 1.25mm thick. Thus, sanding is required. Our R-Hops are
Exactly 1.25mm thick
.
NO SANDING is required
.
·
Cold weather resistant
.
Flat-Hop Bucking
·
Modify
®
Baton Flat-Hop Bucking (Hard Type
for better air seal) is a perfect match for R-Hopped TBB.
S-Nub
·
We have developed our S-Nubs (Silicone-Nub). Like our R-Hops, they are made
specifically for certain hopups
. They just fit and require
zero cutting
. Moreover,
you don't need to flatten the hop arm
.
·
R-Hop is extremely effective at hopping BBs. So normal nubs are usually too thick for R-Hop, and will result in overhopping even if the hop-dial is at zero.
·
For
Krytac
®
Prowin
®
and Madbull
®
hopups, if the nub is thicker than 1.5mm, BBs will constantly overhop. VFC® & Lonex® hopups require less than 1mm nub for R-Hopping.
·
Thus the thickness of S-Nub for Krytac
®
Prowin
®
and Madbull
®
is 1.25mm. So you won't overhop at zero. The "sweet point" is around half at the hop-dial. S-Nub for VFC® & Lonex® is 0.8mm thick.
·
To use the S-nub, simply remove the stock nub, and drop in the S-Nub.
·
S-Nubs are Concave-shaped, thus are best-suited to the R-Hops.
·
FYI, thickness of M-Nub=3mm. Thus, it will overhop unless you flatten the hop arm. But the flattened arm will probably be uneven, resulting in BBs flying to left or right.