UBERTI 1P IVORY GRIPS ~ 1851 or 1861 NAVY; CONVERSIONS; 1871 or 1872 OPEN TOP QR

Description

Arizona Custom Grips
Uberti / Cimarron /
Taylors & Co.
- 1851 Navy Black Powder (Cap & Ball), 1851 Conversions, 1851 Open Tops, & Leech & Rigdon (CSA’s version of the ’51 Navy)
~ Also ~
1861 Navy, & 1871 & 1872 Navy Open Top
(see below for details)
~ Exclusive ~
MAGNA-TUSK
™
iVORY
(QR Coded Packaging)
~~~~~~
oNE-PIECE (nO SCREWHOLE) STYLE
One-Piece vs. Two-Piece Grips
: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance.  Both styles were originally made by Colt in the 1800’s, and both are historically correct.  Whichever style you choose really depends on the look you are after.  We manufacture both styles.
Note:
ANY
of our grips, whether ONE-PIECE
OR
TWO PIECE style, will interchange and work on either style of grip frame.
THIS AUCTION IS FOR THE ONE-PIECE (NO SCREWHOLE) STYLE.
One-Piece grips use a spacer (user installed) between the panels instead of a screw, which results in a rock-tight fit.  Our Two-Piece grips on the other hand come with a free Conversion Kit to enable use on your grip frame, without any modification of your revolver.  Full instructions with illustrations are included with each set of grips.  Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.
10292000
**********
These grips WILL FIT the following Uberti revolvers, which have a grip approximately 3-1/8” tall:
- 1851 Navy Black Powder (Cap & Ball)-
- 1851 Navy Conversion-
- 1851 Navy Open Top -
- Richards-Mason 1851 Navy Conversion –
- C. Mason 1851 Navy Conversion –
- Man With No Name 1851 Navy Conversion -
- 1861 Navy Black Powder (Cap & Ball) -
- 1871 Navy Open Top-
- 1872 Navy Open Top –
- Leech & Ridgon (CSA 1851 Navy) –
What these will NOT fit:
Please note that these will
NOT
fit revolvers made by Pietta or other manufacturers.  Please check and make sure your revolver was made by Uberti prior to ordering.  Cimarron, Taylors & Co., or EMF, etc., are importers, but Uberti’s name as a manufacturer should be found somewhere on the revolver.
In addition, these
WILL NOT FIT
grip frames which are around 3-1/2” tall.  To make sure you are ordering the correct grip,
please check your grip frame measurement prior to ordering
.  Y
our grips or grip frame should measure somewhere between
3-1/16 – 3-1/8”
tall, depending on how you hold your ruler, tape, or caliper.  The important thing is to make sure they are NOT around 3-1/2” tall.
If your grips are 3-1/2” tall, our Uberti 1860 Army Conversion grips are the correct grips for your revolver.
Please contact us if you cannot find what you need, or if you have any questions.  We are always happy to help.
10312000
A note on the Italian-produced Revolvers:
The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made numerous makes and models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, as well as the other Italian gunmaking firms.   Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.
For an additional charge, custom fitting is an option.  Please contact us for further details if you are interested in custom fitting.
10312000
Arizona Custom Grips
About
Magna-Tusk™
Ivory and Stag Grips:
Magna-Tusk™
Ivory and Stag grips, a product of
Arizona Custom Grips
, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material.  Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag.  It is rock-solid, stable, and water, chemical, and oil resistant.  It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials.  Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat.  It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance.  When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing.  In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips.
08292000
The photo used is a stock photo (a sample pair).  Yours will appear similar to these.
Customer satisfaction is important to us – we guarantee we will do our best to ensure complete satisfaction with every purchase!