-40%

ZOSI HD 1080P 4In1 Night Vision IR Cut Outdoor CCTV Security Surveillance Camera

$ 9.49

Availability: 66 in stock
  • Smart Home Protocol: Thread
  • Video Format: NTSC
  • Item included: Single camera
  • Connectivity: Closed System/CCTV-Wired, BNC, Wired
  • Smart Home Compatibility: ZOSI
  • Lens: 3.6mm
  • Surveillance Technology: CCTV
  • Application: Indoor/Outdoor
  • Color: White
  • Brand: ZOSI
  • Waterproof Level: IP66
  • UPC: 612068820515
  • Compatible Brand: ZOSI
  • Maximum Resolution: 1920x1080
  • Power Source: Wall Plug-In
  • IR Distance: Up to 80ft
  • Operating Sound Rating: 60 dB
  • Power: 6 W
  • Camera Technology: CCTV
  • Color Mode: Color Day, B&W Night
  • Features: Outdoor/Weatherproof,HD, Infrared/Night Vision, Wide Angle, Night Vision, Outdoor/Weatherproof
  • Number of Cameras Included: 1
  • Resolution (TVL): HD 1080p
  • Battery Included: No
  • Model: 1AC-2112C-WS-N
  • Location: Indoor/Outdoor
  • IR LEDs Amount: 24pcs, 5mm LEDs
  • Type: Bullet
  • Custom Bundle: No
  • Resolution: 1080p
  • Image Sensor: 1 /3'' Color CMOS with IR-Cut
  • Modified Item: No
  • Condition: New

    Description

    Advanced DWDR Technology
    DWDR (Digital Wide Dynamic Range) technology will adjust the picture's brightness automatically, which allows you to see and capture a lot more details in a wide range of light conditions - from bright highlights to dark shadows.
    1080p HD & 90°-105° Angle View
    With 2.0MP lens and 90°-105° wide field of view, you can see everything clear and smooth in perfectly crisp 1080p HD with every subtle details. Get clearer and sharper images/videos than 720p cameras.
    Enhanced Clarity with 3D-DNR
    3D-DNR (Digital Noise Reduction) technology filters out digital noise from low-light scenes, as well as any noise caused by motion. By eliminating graininess, you can see more fluent and sharpness image in better clarity.
    Troubleshooting
    Question: Video Loss appears where the image from my camera should be displaying on my DVR?
    Answer:
    Check the extension cable (power and video) is securely connected to the camera.
    Check the video output from the camera is securely connected to a video input channel on the DVR.
    Check the power from the camera is securely connected to a power supply.
    If the camera mode do not match your DVR, there is 2 ways to setup : (1) Press OSD Joystick “DOWN” 5 seconds,if still no picture come, try to press “LEFT” “RIGHT””UP” for 5 second, till the signal matching your DVR. (2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of the camera according to your DVRs video Mode.
    On Jul 5, 2022 at 19:09:58 PDT, seller added the following information: